Choosing Asphalt Or Concrete For Driveway Replacement

More Info

Whether you are thinking about a new driveway or needing to repair an existing one, you will find that there are many things to consider. One of the best ways to make a decision is to get help from a local concrete contractor. Choosing the right type of asphalt or concrete, for example, can be an important decision. The cost of the project, the signs of deterioration and the overall look of your driveway will all need to be considered.


Whether you have a concrete or asphalt driveway, it is likely that it will need replacement at some point. The good news is that there are several different options available to help get the job done. These options include patching, resurfacing, and replacing.

Patching can be a great way to fix small blemishes in your driveway. However, patching a large section of asphalt will likely not be possible. A more palatable option is resurfacing, which is the process of reapplying a new layer of asphalt over your existing driveway. This process is designed to help save money and time in the long run.

Resurfacing your driveway is not the cheapest route, but it can be an effective fix to a cracked or damaged asphalt driveway. Depending on the area of your driveway, the cost of resurfacing can range from about $1 per square foot to about $7 per square foot.

Patching a large section of asphalt will likely require excavation. The smallest section can be patched with concrete. The new slab should be five inches thick and reinforced with rebar or wire mesh.

The best way to find out whether your driveway could benefit from resurfacing is to take a look. Most older driveways are in need of a face lift. They are often exposed to massive forces on a daily basis and eventually wear out. If your driveway is still in good shape, it may be worth your time and money to see if resurfacing is right for you.

The best way to determine if your driveway is ready for a face lift is to take a walk on it and look for the telltale signs. These include cracks and heaving. If you see the signs, it may be time to replace your driveway. You can check with your local supply house or paving contractor to find out if it is time for a facelift. The cost of a resurfaced driveway can be a fraction of the cost of installing a new driveway. The only drawback is that your driveway will not look as neat as it did when it was brand new.

Asphalt vs concrete

Choosing between asphalt and concrete for driveway replacement is a decision that requires a lot of consideration. The materials offer different benefits and you'll want to consider both options before making your decision. The material used for your driveway will determine its lifespan.

Asphalt is a solid material, made from crushed stone and sand. This material is a great choice for driveways because it is highly durable. However, there are some downsides to asphalt. In areas with hot climates, asphalt may become sticky and crack. It also absorbs more heat than concrete, causing it to melt snow and ice more quickly. Asphalt also has a short lifespan, with a typical lifespan of 10 to 15 years.

On the other hand, concrete has a much longer lifespan. It can last up to 40 years with regular maintenance. However, it is also more expensive. It can be difficult to repair and it takes more time to complete a project. This makes concrete a better choice for environmentally conscious homeowners.

Concrete is also a good choice for a driveway because it has a smooth texture and can be tinted, colored, and stamped. You can also use stamping to give your driveway a look like tiles. This option can increase the cost of your driveway per square foot.

The biggest advantage of concrete is its durability. However, this material can also be expensive to install. Asphalt driveways are less expensive, with prices ranging from $3 to $6 per square foot. Asphalt also requires less installation time, usually less than an hour. Asphalt can also be easier to repair than concrete.

Asphalt is also good for climates where there is a lot of fluctuating weather. In areas with cold winters, asphalt is less likely to crack. In addition, asphalt pavements have less UV radiation than concrete. This can help reduce air conditioning demands in the summer. Whether you choose concrete or asphalt for your driveway replacement, the choice will be based on your specific climate and budget.

However, asphalt is the preferred material for driveways in many areas. It has a dark color and is a solid material. It also can be stained, stamped, or etched.

Signs of deterioration

Keeping your driveway in good condition is important, as it is one of the most visible features of your property. If your driveway is damaged, it can affect the value of your home. It can also pose a safety hazard. You may be able to fix some of the problems, but in the end, you may need to replace the driveway altogether.

Concrete is one of the most common materials used for driveways. The material is prone to deterioration from age, exposure to the elements, and frequent traffic. It can also be damaged by salting, as salt absorbs water. If you notice a lack of color in your driveway, you may want to consider replacing it.

Cracks are another common sign of driveway deterioration. Cracks can be caused by freeze-thaw cycles, as well as by the freezing and expansion of ice. Eventually, cracks can grow into large holes, which can damage your driveway. They can also cause your foundation to shift. If you notice a large number of cracks in your driveway, you may need to consider replacing the entire driveway.

Cracks can also be caused by inadequate pavement thickness or by improperly compacted subbase material. These can also cause a number of problems, including foundation displacement and water pooling. Typically, a driveway should be leveled before resurfacing. This helps to eliminate water pools, which can cause structural problems.

Potholes are another common sign of deterioration in a driveway. These potholes can severely damage your tires. They can also create a safety hazard by making your path slippery.

Cracks can also lead to alligator cracks, which are a result of the subbase breaking down. Unlike cracks, alligator cracks are caused by multiple cracks, usually in large sections of the driveway. Alligator cracks require extensive repair, as they require cutting out and replacing the entire driveway.

Another common sign of deterioration in paving is a grey or brown color on the surface. This is a result of the presence of tar content in the asphalt. UV rays can also affect the color of your driveway. Regular seal coatings can prevent this from occurring.


Investing in a new driveway can be a good decision. It can increase the aesthetic appeal of your home and make it safer for your family. However, replacing your driveway can be expensive, so it is important to plan ahead.

Driveway replacement costs vary based on a number of factors. The type of material used to build your driveway will also affect its costs. Materials such as asphalt, Portland cement, and pavers can vary in price. Some materials last longer than others, and some may be easier to maintain. The size of your driveway will also determine the cost.

If you decide to replace your driveway, make sure you are involved in the entire process. This is especially important if you live in a community where parking is limited. Having someone come out to give you a free estimate can help you decide who to hire.

Depending on your location and the size of your driveway, the cost of replacing it can range from $7 to $12 per square foot. The cost of driveway replacement will also include the cost of digging up the old driveway, hauling away the old materials, and installing the new driveway.

Concrete driveway replacement costs can vary greatly. Some driveways can cost thousands of dollars to replace. This is especially true if the concrete is old or if you live in an area where groundwater erosion can damage the concrete slabs.

Asphalt driveways cost less to install and repair. Asphalt driveways are usually made up of three layers: the base, asphalt, and sealant. The sealant helps keep moisture out of the base layer. The base layer should be at least four inches deep.

If your driveway is cracked, leveling it is the best way to repair it. However, it can be expensive to level a driveway. For this, you may need to add a layer of crushed stone or dirt. This will provide more stability for your foundation.

The cost of driveway replacement can vary significantly based on the type of material used, the size of your driveway, and the location of your home. However, planning ahead is the best way to determine your budget and explore your options.

Campaign Wall

Join the Conversation

Sign in with your Facebook account or